How To Choose The Right Water Softener Size?

Reading water softener reviews before buying the product is a given, however what you also need to understand is what size water softener you need.​

Moreover, the level of your research will also determine how effective the product is in your home. In most cases, you need to consider how hard your household water is, where you intend to install the system, how large your household is, how you use water, and the costs of maintaining the unit over time.

Checking the right size for your water softener does not mean that you should choose one that is full of features; neither is buying an expensive model.

Before you can really select a device with the size that meets your household needs, you have to tick some requirements. And this is what this article is all about.

Choose a Salt Based Solution

1. Use the proper oil

If your intention is to soften your hardened water, your best bet will be to get a salt-based water softener solution. The alternatives can get the job done too, but not as thoroughly as this would.

After you have chosen a device, the next step is to determine how big your household is, how many people are there and the amount of water used by each person. Now you need to measure the amount of water consumed in a day in your home.

You can do this by multiplying the number of people in your home with the average gallons of water used by each person per day. With this, you should arrive at a rough estimate.

Now that you have a rough estimate of the possible amount of water consumed each day, the next thing is to test the hardness of your water.

You can do this with a testing kit. They are often available in stores offline but if you can’t find one, then order it online.

This tool should give you a figure — after using it to test the hardness of the water — that you need to multiply by the number you calculated earlier.

Choosing the right oil for your deep fryer is half battle won. Once you know the type of oil you want to use, you will need to fill up the fryer with it, taking care not to over-fill or under-fill it.

If you have a model that have a minimum or maximum fill line, it becomes even easier as you have a ready gauge to guide your measurement.

​Water Softener Size

2. Turn it on and start operating

You have to remove some amount of grains in the water — with the help of your water softener system — to derive a level of water softeners.

When searching for the best domestic water softener, you need to consider the capacity of the device in removing grains — often listed among the features. If you select a system that lacks this feature or is wanting, you will not be able to achieve the desired level of water softening.

This is because of the continuous regeneration cycle that often reduces the flow of water. Selecting a device with on demand meter can relatively counter this problem because it will adjust itself according to the water usable habits in your household.

To start using your device, you need to turn it on by plugging it in and using the switch button to power it up.

After that, set the temperature and time and ensure that you obtain the right level of temperature for the oil without going over that.

You also need to maintain a temperature between 350 degrees F and 375 degrees F which is the suitable range for most of the cooking you will be doing.

If your device comes with a thermostat, you don't have to bother too much about the temperature as it will automatically determine the correct temperature.

However, if it doesn't come with one, you may have to get yourself a thermometer to select the right temperature for the oil.

Leave a Comment: