How To Use A Hammer Drill

A hammer drill is an excellent choice for one’s home tool collection. As a rotary drill with hammering action, it has a wide range of applications. Just like a conventional hammer, a hammer drill uses quick and repeated hits to break up the target material. Additionally, it incorporates the spinning action of a conventional drill. The force doesn’t have to be extreme because these drills make thousands of impacts per minute (IPM). This type of drill normally runs on electricity, mitigating the need for repeated hammering by a person. A person utilising a normal hammer would also be significantly less effective. Owing to their unique action, hammer drills are more effective and faster than regular drills.

What Jobs Can A Hammer Drill Do?

A hammer drill is preferable to conventional drills because of their usability as a normal rotary drill, while having additional hammering ability. They are ideal for jobs that require more force than what a regular drill can provide. They are practical for concrete, brick, and materials of unknown composition. They’re preferable for anchor bolts, concrete screws, and wall plugs. Quality matters in drills. It’s better that you opt for a proven brand; it can save you money in the long run.

How Do You Use A Hammer Drill on Concrete?

hammer drill on concrete

The first recommendation for drill usage is to take time to get used to the machine. Learn how to start, stop, and control the drill. Practising will also acquaint you with how much force is required to use the machine. Oftentimes when a drill is required, the depth to which you must penetrate the material is already specified. Newer machines may have a depth control mechanism. If your drill doesn’t, have this feature, simply mark the drill bit with the specified distance from the tip. As the drill bit enters the concrete, you’ll have clear indication of where to stop. Similarly, mark the place on the wall, or whatever concrete you’re trying to infiltrate. On low speed, make a small indentation which will serve as a guide for the drill bit.


To begin drilling, position the drill in the indentation. Depending on the power of the drill, you may have to adjust the amount of pressure exerted. In the absence of a hammering function, one can repeatedly push for a few seconds and then pull back. Take caution to not let the drill overheat during this process.


Concrete can sometimes be particularly hard in some areas. To overcome this, remove the drill. Insert a masonry nail into the hole and drill with the hammer function. The hard concrete may break with this technique, after which you can revert back to drilling normally.


Hammer drills are usually bulkier and more expensive than regular rotary drills. However, their cost is well worth it because there are some jobs that are only possible with this type of intensive drill. The wide application of hammer drills make them indispensable for amateurs and professionals alike. In order to get the best outcome, one should focus on brand, workmanship, and features as opposed to only price. Look through our collection of the best hammer drills on the market to see which one is best for you here https://productspy.co.uk/hammer-drill/

Leave a Comment: