Electric Bathroom Scales Problems You Might Encounter and How to Fix Them

Electric Bathroom Scales

In the world of advancing technology, most basic things are improved to enhance the ease of using them. Initially, bathroom scales were analog and everyone depended on them for weight measurement. Today, the bathroom scales have greatly improved and are now equipped with digital displays, in which you can find the best bathroom scales here.

Most people prefer the digital scales to the analog ones and they are the most accurate scales to use because no fluctuations are experienced most of the time due to continuous electric current. When these types of bathroom scales are used, just like any other, there are some problems that may occur in the process. This may be due to environmental conditions or user behavior that cause the bathroom scales to perform poorly. Fortunately, in this article, we are going to guide you through the steps to troubleshooting and fixing the common problems.

​Resetting Test

​If you realize that your electric bathroom scale keeps displaying- inaccurate results, perhaps it needs to be reset. Resetting will require you to slide the knob to adjust the display then wait until it reads zero on the display. If that doesn’t happen using a knob, the scale might need some kind of stepping or tapping at a specific place, depending on the model, to erase all the digital codes to remain with zero. Having done that, you have to test the accuracy of the bathroom scale to ensure that the problem has been fixed. This is done by placing an object whose weight is known on the scale and see if it gives the right results. Upon getting the correct result displayed on the scale, it should be ready for use.

​Level Out the Bathroom Scale

​Level Out the Bathroom Scale

​When the bathroom scale continues to display inaccurate results even after resetting, check whether the scale is placed on an even surface. To verify the evenness of the surface, get a construction level to measure.

Alternatively, you can place a round object on the surface that the scale was on and then watch it closely.

If there is a slight movement seen on the object, the floor is not even. Find an even surface and relocate the scale. The electric scale will now start working correctly.


​Every once in a few months, there is need to calibrate the electric bathroom scale in your house. Failure to do this, after some time, the bathroom scale will have an issue and stop working. First, you have to check for a specific button that sets the scale into calibration mode. When in calibration mode, place an object of known weight on top of the scale. Immediately, the results should be displayed on the screen of the scale. Then, end the procedure by pressing the calibration button to display ‘0’ or ‘end’ or ‘cal’.

​Battery Change

Sometimes prolonged usage of the same batteries can cause faults in the electric bathroom scale. Furthermore, incorrectly inserting the batteries in the unit can have a similar effect on the bathroom scale.

This may cause the scale not to function at all. You should remove the bottom plate from the scale to reveal the battery compartment. Then, take out the battery and check for any lost connection issue around the display area.

Fix the problem if you can at home or, get newer batteries to function correctly.

Electric Bathroom Scales Battery

​Use a Water-Proof Junction Box

​Most scales are normally placed near the bathrooms for availability purposes so that it is easy for you to check your weight after a shower. Moisture on the feet enters the system in the weighing scale to reduce the capacity between signal lines. The cables transmit electrical energy to the load cells to merge the signal lines and create an electrical sound that affects the accuracy of the scale. This can be avoided when you use a waterproof NEMA 4-rated junction box or load cells that are sealed hermetically at the strain gauge and cable entry. Simply shut the strain gauge and weld the cable entry to avoid moisture in the scale.


​Bathroom scales are bound to give out inaccurate results at some point. When it happens, you shouldn’t panic or throw the unit away. You can always fix it after the problem has been detected at home. If the problem persists, then you can return it to the manufacturer provided it has a valid warranty, and have it fixed at no cost.

About the Author Harry Thompson

Hi, I'm the founding guy of Product Spy. Highly experienced in home and garden appliances through years of online research. I want to help everyone in the UK by streamlining their research when buying a new product. I will be putting the hours in researching to find the best products so you don't have to.